TP-Link TL-WA7210N User Guide - Page 55
Wireless Settings
View all TP-Link TL-WA7210N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide 4.7.1 Wireless Settings Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your wireless network on the screen below (Figure 4-7). Figure 4-7 Wireless Settings in AP Client Router mode Wireless Network Name - Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. The default SSID is set to be (XXXXXX indicates the last unique six characters of each device's MAC address), which can ensure your wireless network security. But it is strongly recommended that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT the same as test. Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the device can be used. It may be illegal to use the wireless function of the device in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE will pop up. Select I agree to these terms of use, and click Accept to continue. Note Dialog Note: Ensure you select a correct country to comply with local laws. Incorrect settings may cause interference. Transmission Power - The available options of transmission power are determined by the region selected. 45