TP-Link TL-WA7210N User Guide - Page 56
Wireless Security
View all TP-Link TL-WA7210N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. Mode - This field determines the wireless mode which the AP works on. The options includes: 11b only, 11g only, 11n only, 11bg mixed, 11bgn mixed. Channel Width - The bandwidth of the wireless channel. Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wireless stations will be able to access the AP, otherwise, wireless stations will not be able to access the AP. Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the AP will broadcast its name (SSID) on the air. Be sure to click the Save button to save your settings on this page. Note: The device will reboot automatically after you click the Save button. 4.7.2 Wireless Security Selecting Wireless > Wireless Security will enable you to configure the security of the wireless network for your device on the page as shown in Figure 4-8. Figure 4-8 Wireless Security Selected SSID: If Multi-SSID is enabled, you can choose one of the SSIDs from the pull-down list. 46