TP-Link TL-WA7210N User Guide - Page 86

Use the IP Address specified by ISP

Get TP-Link TL-WA7210N PDF manuals and user guides View all TP-Link TL-WA7210N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide Figure 5-9 PPPoE Advanced Settings  MTU Size - The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP.  Service Name/AC Name - They should not be done unless you are sure it is necessary for your ISP.  ISP Specified IP Address - If you know that your ISP does not automatically transmit IP address to the Device during login, click "Use the IP Address specified by ISP" checkbutton and enter the IP address in dotted-decimal notation, which is provided by your ISP.  Detect Online Interval - The default value is 0. You can input the value between 0 and 120. The Device will detect Access Concentrator online every interval seconds. If the value is 0, it means not detecting.  Use the following DNS Servers - If your ISP specifies a DNS server IP address for you, click the checkbox, and fill the Primary DNS and Secondary DNS blanks below. The Secondary DNS is optional. Otherwise, the DNS servers will be assigned dynamically from ISP.  Primary DNS - (Optional) Enter the DNS IP address in dotted-decimal notation provided by your ISP.  Secondary DNS - (Optional) Enter another DNS IP address in dotted-decimal notation provided by your ISP.  Note: The new advanced PPPoE parameters will not take effect until you dial-up again. Click the Save button to save your settings. Click the Back button when finished. 4. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option. And then you should enter the following parameters as in Figure 5-10. 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
76
Figure 5-9 PPPoE Advanced Settings
MTU Size
-
The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is
usually fine. For some ISPs, you need modify the MTU. This should not be done unless you
are sure it is necessary for your ISP.
Service Name/AC Name
-
They should not be done unless you are sure it is necessary for
your ISP.
ISP Specified IP Address
- If you know that your ISP does not automatically transmit IP
address to the Device during login, click "
Use the IP Address specified by ISP
" checkbutton
and enter the IP address in dotted-decimal notation, which is provided by your ISP.
Detect Online Interval
- The default value is 0. You can input the value between 0 and 120.
The Device will detect Access Concentrator online every interval seconds. If the value is 0, it
means not detecting.
Use the following DNS Servers
- If your ISP specifies a DNS server IP address for you,
click the checkbox, and fill the
Primary DNS
and
Secondary DNS
blanks below. The
Secondary DNS
is optional. Otherwise, the DNS servers will be assigned dynamically from
ISP.
Primary DNS
- (Optional) Enter the DNS IP address in dotted-decimal notation provided by
your ISP.
Secondary DNS
- (Optional) Enter another DNS IP address in dotted-decimal notation
provided by your ISP.
Note:
The new advanced PPPoE parameters will not take effect until you dial-up again.
Click the
Save
button to save your settings.
Click the
Back
button when finished.
4.
If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select
BigPond
Cable
option. And then you should enter the following parameters as in Figure 5-10.