Toshiba Portege M400 PPM40C-TD30TEF Users Manual Canada; English - Page 272
Starting, Modifying and Ending the BIOS Setup, Program, Starting the BIOS Setup Program
View all Toshiba Portege M400 PPM40C-TD30TEF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
TOSHIBA RAID Starting, Modifying and Ending the BIOS Setup Program Starting the BIOS Setup Program 1. Switch on your computer while pressing the Esc key. If Password = is displayed, enter the User Password and press the Enter key. Please refer to Chapter 6, the TOSHIBA Password Utility, for details about the User Password. The "Check system. Then press [F1] key." message is displayed. 2. Press the F1 key. The BIOS setup program will start up. Modifying the BIOS 1. Select the RAID ARRAY setting in the SYSTEM SETUP (3/3) screen. Please refer to the operating instructions displayed in the settings screen. 2. The settings are explained as follows. Modify the settings as necessary. Current State Create State Built-in HDD Shows the current hard disk status. Modify the hard disk configuration. (Modifications are made with this setting). Status of the connected hard disk. Second HDD Status of the second hard disk. Configuration status and settings JBOD 1RAID-0 2RAID-0 RAID-1 UNKNOWN No Drive No RAID settings. Windows cannot be installed in this disk except for using recovery CD/DVD. Including RAID settings. Windows can be installed in this disk. Set to RAID-0 for 2 hard disks. This cannot be set in this computer (Current State Only). Set to RAID-1 for 2 hard disks (Current State Only). A RAID status except for the above status and settings (Current State Only). No hard disks connected (Current State Only). G-4 User's Manual