Vtech CM18445 User Manual - Page 13
Connect your new console
View all Vtech CM18445 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation setup Connect your new console Option 1: If you have four single-line wall jacks, install your console, as shown below. Line 4 Line 3 Line 2 Line 1 1. One end of the coiled telephone line cord has already been plugged into the handset. Make sure it is plugged in firmly. Plug the other end of the coiled handset cord into the left side of the console. 2. Open the line jack covers and plug one end of the telephone line cords into the telephone line jacks of the console. 3. Plug the other end of the telephone line cords into the single-line telephone wall jacks, as shown above. 4. Insert the connector of the power adapter to the power jack on the back of the console. 5. Connect the plug head of the power adapter to the power outlet that is not controlled by a wall switch. Once the installation is successful, you can make and receive calls on the console. Now, you can also register your cordless devices or start to configure your console. NOTES: • Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, please dial 1 (800) 267-7377. • If you are installing less than four telephone line cords to the console, plug the telephone line cords in ascending order starting from the L1/2 jack. Avoid having unoccupied telephone jack between other occupied telephone jacks.