Vtech CM18445 User Manual - Page 20

Register devices to your new console Add and register a cordless handset You can add cordless handsets (CM18045/AM18047, purchased separately) to your console. Each handset must be registered with the console before use. The handsets are assigned with available extension numbers starting from 1 in ascending order (1 to 9). Make sure the cordless handset is properly installed before you begin registration. Refer to the user's manual of the cordless handset for details. If the handset does not have enough power to proceed with the registration, you need to charge the new handset for at least five minutes. To register a handset to your console Make sure the CM18045/AM18047 handset is out of the charger and the screen shows 1) Press MENU on Console ->Registration ->Register Ext. 2) Press # on this extension to register. before you begin registration. CM18045/AM18047: 1. On the console, press MENU/SELECT. 2. Press or to scroll to Registration, then press MENU/SELECT or SKIP . 3. Press MENU/SELECT or SKIP again to select Register Ext. 4. On the handset, press #.�T�h�e��h�a�n��d�s�e�t�s�h��o�w�s� Registering.... 5. The handset beeps once and begins registering to the console. It takes up to 60 seconds to complete the registration. There is a beep sound when the registration is successful. Both the console and the handset show Handset X registered. (X represents the extension number, ranged from 1 to 9). It takes up to 60 seconds to complete the registration. 6. Press a line key (LINE 1 - LINE 4). If you hear a dial tone, the registration was successful. CM18445/AM18447: NOTES: • If the registration is not successful, the console screen displays Registration failed. Try the registration process again. • You can continue to register a second handset by following step 3 on the console and step 4 on the handset. If no action is taken, the console will return to idle mode. 11