Yamaha M2500 Owner's Manual - Page 13
A7/G1-A14/G8
View all Yamaha M2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Control panel A7/G1-A14/G8 section 1 2 0 10 LEVEL 0 10 LEVEL ON AFL A7 / G1 ON AFL A8 / G2 3 0 10 LEVEL ON AFL A9 / G3 0 10 LEVEL ON AFL A10 / G4 0 10 LEVEL ON AFL A11 / G5 0 10 LEVEL ON AFL A12 / G6 0 10 LEVEL ON AFL A13 / G7 0 10 LEVEL ON AFL A14 / G8 These output channels control the signals of AUX buses 7-14 or GROUP buses 1-8. You can use the GROUP/AUX FLIP switch (page 14) to select the signals that will be controlled. s GROUP/AUX FLIP switch= GROUP ( ) The signals of AUX buses 7-14 will be sent to channels A7/G1-A14/G8 respectively, and will be output individually from the AUX/GRP OUT A7/G1-A14/ G8 jacks. AUX5 0 10 AUX6 0 10 AUX7 0 10 AUX8 PRE 0 10 AUX9 0 10 AUX10 0 10 LEVEL ON AFL A7 / G1 0 10 LEVEL ON AFL A8 / G2 s GROUP/AUX FLIP switch= AUX ( ) The signals of GROUP buses 1-8 will be sent to channels A7/G1-A14/G8 respectively, and output individually from the AUX/GRP OUT A7/G1-A14/G8 jacks. A LEVEL control This adjusts the output level of AUX/GRP OUT A7/ G1-A14/G8. The "v" position is nominal level. B ON switch This turns AUX/GRP OUT A7/G1-A14/G8 on/off. When the switch is on ( ), the signals from the A7/ G1-A14/G8 section will be output from the AUX OUT A7/G1-A14/G8 jacks respectively. C AFL switch This switch is used to monitor the signal from the AUX/GRP OUT A7/G1-A14/G8 section via the MONITOR OUT/PHONES jacks. If all the input channel PFL switches are off, you can turn on this AFL switch to monitor the corresponding signal of the A7/G1-A14/G8 section from the MONITOR OUT/PHONES jacks. You can use the MASTER PFL switch of the monitor section to switch the monitor signal between pre/post-fader (LEVEL control). PAN C L R ODD EVEN 1-2 ST 3-4 MONO 5-6 7-8 LCR 0 10 LEVEL ON AFL A7 / G1 0 10 LEVEL ON AFL A8 / G2 10 M2500-Owner's Manual