Yamaha M2500 Owner's Manual - Page 28
Rear panel
View all Yamaha M2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Rear panel Monaural input channel input/output jacks 24 INPUT 23 INPUT 22 INPUT 21 INPUT 20 INPUT 19 INPUT 18 INPUT 17 INPUT 1 2 INSERT INSERT INSERT INSERT INSERT INSERT INSERT INSERT I/O 0dB I/O 0dB I/O 0dB I/O 0dB I/O 0dB I/O 0dB I/O 0dB I/O 0dB A INPUT jacks These are XLR-3-31 type input jacks (balanced). If the rear panel PHANTOM MASTER switch and the +48 V switch of the corresponding monaural input channel are on, phantom power will be supplied. The nominal input levels and pin wiring are as follows. s Nominal input • -26 dB pad switch= on / +10 dB to -34 dB • -26 dB pad switch= off / -16 dB to -60 dB Male XLR plug 1 (ground) 3 (cold) 2 (hot) B INSERT I/O jacks These are TRS phone jacks for inserting external effect units into each monaural input channel. The nominal level is 0 dB. The pin wiring is as follows. Tip (send) Ring (return) 1/4" TRS phone plug Sleeve (ground) Connect to INSERT I/O jack 1/4" phone plug Tip (send) To processor's input Sleeve (ground) 1/4" phone plug Tip (return) From processor's output Sleeve (ground) 25 M2500-Owner's Manual