ZyXEL Elite 2864 User Guide - Page 105
&N0, &N32, AT&N, &B0, &B1
View all ZyXEL Elite 2864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Code Bits (5) (4) (3) (2) (1) (0) Bin. Dec. Description 1 32 Disables DATA/VOICE button switch. 1 16 Disables V.17 fax in calling mode, no effect on answering mode. (See &N0 and &N32) 1 8 Disables escape sequence in answer mode. 1 4 CND message will be forced on even if ATQ2 is set. (See S40b1) 1 2 Enables throughput averaging. Reserved. S43 Bit-mapped register, default: 8: Code Bits Bin. (7) 1 (6,5,4) (3) 0 1 (2) 1 (1) 1 (0) 1 Dec. Description 128 The modem hangs up if the line condition does not permit the modem to run at the highest speed set by the last AT&Nn command. Reserved. 0 Enables cellular mode. 8 Disables cellular mode. (Default) 4 Disables cellular mode Auto Transmit Power Adjustment. Uses S49b0-3 to set transmission power. 2 Disables ZyX19200 in Multi-Auto mode. 1 Disables ZyX16800 in Multi-Auto mode. S44 Bit-mapped register, default: 0: Code Bits (7) (6) Bin. Dec. Description 1 128 Enables UK (Australia, Singapore, India) type 'short-short ring' ringback detection. 1 64 When selected with &B0, the DTE speed is fixed at 38400 when the link speed is above 9600; at 9600 if link speed is 7200 and at link speed if it is below 7200. When selected with &B1, the DTE speed is fixed at current rate when an ARQ connection is made; when a non-ARQ connection is made, the DTE speed follows the link rate. 8-19