ZyXEL Elite 2864 User Guide - Page 140

Password: (Enter supervisor password) ******** Password: (Enter new supervisor password) ******** Verify: (Enter the new supervisor password again) ******** OK The command AT*Hn will modify the nth user password. You will be prompted to enter the supervisor password first and then be prompted to enter the nth user password. The command AT*V will list the 50 user passwords and the supervisor password on the screen for viewing. Again, you will be prompted to enter the supervisor password first. The commands below will enable different types and levels of security: *G0 Disables security function. *G1 Enables type 1 and level 1 security, with password check. *G2 Enables type 1 and level 2 security, with password check and call-back. *G3 Enables type 2 and level 1 security, with password check. *G4 Enables type 2 and level 2 security, with password check and call-back. *G5 Enables type 2 and level 2 security, with password check and call-back, remote site enters the call-back number. Note: Before the security type or level can be changed, the modem requires the supervisor password. For type 2 security, the remote site will be prompted to enter the user password. A maximum of 3 tries in 40 seconds is allowed. If a correct password is not entered within this time limit, the line will be disconnected. If the remote site is to enter the call-back number, it will be prompted to do so. Remote Configuration The 2864 series modems provide a remote configuration capability. Remote configuration is provided as a profile by profile batch mode.When on-line, the remote modem's current configuration or one of its profiles can be read into one of the local modem's user profiles. This profile is modified locally and the line can be disconnected during this time. 13-2