ZyXEL Elite 2864 User Guide - Page 161
Class 2 Command Responses
View all ZyXEL Elite 2864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Command +FREL=n +FREV? +FSPL=n Value n=2 n=3 n=4 n=5 n=0 n=1 n=0 n=1 Description Page is bad; retrain is requested. Page is good; retrain is requested. Page is bad; procedure interrupt is requested. Page is good; procedure interrupt is requested. Phase C received EOL alignment: The EOL patterns are bit aligned as received. The last received bits of EOL patterns are byte aligned by the DCE, with necessary zero fill bits inserted. Refer to TIA PN-2388 for details. Requests the DCE revision identification. "Enable polling" command: Disables polling. Enables polling. All other +F commands are not supported, but the modem will respond OK. In many cases this means "don't care." See PN 2388 for command details. Class 2 Command Responses Response +FCFR +FCIG:"string" +FCON +FCSI:"string" +FDCS:vr,br,wd,ln, df,ec,bf,st +FDIS:vr,br,wd,ln, df,ec,bf,st +FDTC:vr,br,wd,ln, df,ec,bf,st +FET:n Value +FHNG:n n=00 n=10 n=20 n=40 n=50 Function and Description Confirmation prompt: ready to receive data. Reports the remote ID response CIG. Facsimile connection response. Reports the remote ID response CSI. Reports the session parameters response; refer to the +FDCC=.... command. Reports the session negotiation parameters response; refer to the +FDCC=.... command. Reports the remote capabilities response; refer to the +FDCC=.... command. Post page message response; refer to the +FET=n command. Call termination status response. Normal and proper end of connection. Transmits the error on phase A hang up code. Transmits the error on phase B hang up code. Transmits the error on phase C hang up code. Transmits the error on phase D hang up code. 15-7