ZyXEL Elite 2864 User Guide - Page 71
AT&R1, AT&R0, AT&S0, AT&S1, S41.5=1, S44.4=1, S40.1=1
View all ZyXEL Elite 2864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
RTS OPTIONS + IGNORED AT&R1 CTS TRACKS AT&R0 RTS The modem assumes that RTS is always ON and ignores the serial port signals. (Default) Delay before CTS responds to RTS's change. The delay is set in S26. Note: Effective only in synchronous mode. This setting is ignored in asynchronous mode. RTS is always used as a hardware flow control signal in this case. DSR OPTIONS + ALWAYS ON DATA SET READY AT&S0 AT&S1 The modem forces DSR to always remain ON. (Default) According to ITU-T. DSR ON during handshake. If S41.5=1, DSR follows CD, and pulses off for 0.5 sec for CD on-off transition. If S44.4=1, DSR follows DTR. COMMAND ECHO + ENABLED DISABLED ATE1 ATE0 The modem echoes commands. (Default) The modem does not echo commands. RESULT CODE + ENABLED DISABLED ATQ0 ATQ1 ATQ2 The modem returns result codes. (Default) The modem does not return result codes. If S40.1=1, the modem does not return result codes in answer mode. DTE ASYNC SPEED 230400 115200 76800 57600 38400 19200 16800 14400 Selects DTE port asynchronous serial speed. AT command auto speed detection will override this selection. 307200 153600 102400 61400 51200 6-5