ZyXEL Elite 2864 User Guide - Page 63

Dialing Messages Dialing will cause the following screen to be displayed on the LCD: DIALING 1234567 The dialed phone number will be displayed on the second line of the 20×2 LCD screen. If the number exceeds 20 digits, only the first 20 digits/characters will be displayed. If the modem's DIAL-UP LINE jack is not plugged in or not connected, the LCD screen will display the following: NO DIAL TONE.......... 1234567 then the modem will go back to the IDLE STATUS screen. If the line is busy, after three to five seconds, the LCD displays: BUSY 1234567 then goes back to the IDLE STATUS screen. If the phone company is ringing the remote modem, a RINGING message is sent to the terminal. Setting S42.6 = 1 will disable this RINGING result code. If any key interruption occurs (from the terminal or panel) and breaks in before the connection is made, the screen displays: ABORT 1234567 then goes back to the IDLE STATUS screen. If the time interval depicted in the S7 register expires, and the line is still not connected, the LCD screen shows: DISCONNECTING......... 1234567 then goes back to the IDLE STATUS screen. If the first handshaking signal has been detected, the LCD screen will display: HANDSHAKING 1234567 5-7