ZyXEL Elite 2864 User Guide - Page 143

CALLER NUMBER: 7135551414 or CALLER NAME: Jack Smith RING In the multiple message format, if the caller's number and name are available, the ring message will be: RING TIME: MM-DD hh:mm CALLER NUMBER: CALLER NAME: RING Following is an example: RING TIME: 04-28 12:30 CALLER NUMBER: 7135551414 CALLER NAME: Jack Smith RING If the caller number and name are not available, the ring message will be: RING TIME: 04-28 12:30 REASON FOR NO NUMBER: OUT_OF_AREA REASON FOR NO NAME: PRIVACY RING The AT*T command will cause the modem to send the last CND message. Setting S48.0=1 will cause the modem to report CND information in its ASCII coded hexadecimal raw data format. The DTE software is responsible for explaining the data. Please refer to the Bellcore Technical Advisory AT-NWT-000030 document for the exact data format. The above Caller ID scheme applies to the North America area. Different countries may employ different Caller ID schemes, check if the scheme used in your country is supported before using the Caller ID feature. For most other Caller ID schemes, only the Caller telephone number is provided. Distinctive Ring This is a phone service that may be offered by your phone company. Check your phone company for availability. With this service, you can have several phone numbers assigned to the same phone line. The phone company will send a different type of ring signal for each phone number being called. The subscriber can distinguish which number is being called by recognizing which type of ring is being received. 13-5