ZyXEL Elite 2864 User Guide - Page 164
ID Strings are reported. +FNF:, +FNS:
View all ZyXEL Elite 2864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
+FIS=vr,br,wd,ln, df,ec,bf,st +FKS +FLI="string" +FLO=n +FLP=n +FMI? +FMM? +FMR? +FMS=n +FNR=rpr, tpr, idr, nsr n=0 n=1 n=2 n=0 n=1 rpr=0 rpr=1 tpr=0 tpr=1 idr=0 idr=1 nsr=0 nsr=1 Current session parameter: refer to the +FDCC Class 2 command on page 15-4 for parameter settings. Session termination command. Local ID string parameter. Flow control options: No flow control. Sets XON/XOFF software flow control. Sets CTS/RTS hardware flow control. Document for polling command: The DTE has no document for polling. Indicates that a document is available for polling. Requests DCE manufacturer identification. Requests DCE model identification. Requests DCE revision identification. Minimum phase C speed parameter: refer to the +FMINSP Class 2 command on page 15-6 for parameter settings. Negotiation message reporting control parameters: Receiver parameters are not reported. +FIS: and +FTC: response reports are suppressed. Receiver parameters are reported. +FIS: and +FTC: response reports are generated. Transmitter Parameters are not reported. +FCS: response reports are suppressed. (+FCS parameter is still loaded) Transmitter Parameters are reported. +FCS: response reports are generated. ID Strings are not reported. +FTI: +FCI: and +FPI: response reports are suppressed. ID Strings are reported. +FNF:, +FNS: and +FNC: response reports are generated. Non-standard frames are not reported. +FTI: +FCI: and +FPI: response reports are suppressed. Non-standard frames are reported. +FTI:, +FCI: and +FPI: response reports are generated. 15-10