ZyXEL Elite 2864 User Guide - Page 162
Class 2 Flow Control, CLASS 2.0 AT+F COMMAND SET., Commands
View all ZyXEL Elite 2864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Response Value n=70 n=90 n=100 +FNSC:"HEX string" +FNSF:"HEX string" +FNSS:"HEX string" +FPOLL +FPTS:n +FTSI:"string" +FVOICE Function and Description Receives the error on phase B hang up code. Receives the error on phase C hang up code. Receives the error on phase D hang up code. Reports the non-standard facilities command frame. Reports the non-standard facilities frame response. Reports the non-standard setup frame response. Remote polling indication. Receive page transfer status response; refer to +FPTS=n command. Report remote ID response TSI. Transition to Voice response. Class 2 Flow Control Flow control is necessary to match the DTE-DCE data rate to the line signaling rate while transmitting or receiving Group 3 (T.4) data. In Class 2 fax mode, both hardware (RTS/CTS) and software (XON/XOFF) flow control are enabled. CLASS 2.0 "AT+F" COMMAND SET. Command Syntax += +=? +? Description Executes a command or sets a parameter. Reads permissible settings. Reads the current setting. Commands Command +FAA=n +FBO=n +FBS? Value n=0 n=1 n=0 n=1 Description Auto-answer mode parameter: The DCE answers as set by +FCLASS. The DCE answers and auto-determines the call type. Phase C data bit order: Selects direct bit order. Selects reversed bit order in receiving mode for phase C data. Buffer size parameter; read only. 15-8