ZyXEL Elite 2864 User Guide - Page 187
S57.4=1, 1,2,2.0,6,8,Z, method, ERROR
View all ZyXEL Elite 2864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
• AT+FCLASS=? The DCE returns permitted modes. The response is (with S57.4=1): 0,1,2,2.0,6,8,Z OK • AT+VLH=? This enables the DTE to inquire the hook status of the connected local phone. The DCE will return 0 for on-hook and 1 for off-hook status. • AT+VNH= The DCE enables or disables automatic hang-up to a varying degree for data and fax modes. Hook Control Description 0 The DCE retains automatic hang-ups as is normal in the other modes (such as hanging up the phone when the DCE does not detect a data carrier within a given time interval). (Default) 1 The DCE disables automatic hang-ups usually found in the other Non-Voice Modes. 2 The DCE disables automatic hang-ups in the other Non-Voice Modes. The DCE only performs a "logical" hang-up (returns the OK result code). • AT+VNH? The DCE returns the current hang-up setting, followed by the OK result code. • AT+VNH=? The DCE returns permitted hang-up modes. The response is : 0,1,2 OK • AT+FLO= The DCE selects the type of flow control provided and used. 0 1 2 Flow Control Method XON/XOFF and RTS/CTS flow control is turned off. Uses software XON/XOFF flow control in either direction. Uses hardware RTS/CTS flow control. The DCE returns the OK result code if the DCE accepts the command. The DCE returns the ERROR result code if the subparameter is out of range. 16-11