ZyXEL Elite 2864 User Guide - Page 24

• one (1) 2864 series universal modem • one (1) power adapter (external model) • one (1) RJ11 telephone cable • one (1) JM8 leased-line cable (2864L model only) one (1) RJ45 ISDN telephone cable (2864I model only) • one (1) 2864 series user's manual • one (1) ZFAX 3.5" floppy disk and floppy disk(s) for drivers and other utilities. • one (1) warranty/registration card • one (1) Quick Reference Card Contact your dealer or the store where you bought the modem if anything is missing. Check the modem for shipping damages. If you find any damage, contact the shipping agency immediately. Retain the shipping and cushioning materials for future storage or shipping needs. Please direct any additional questions about damaged or missing materials to your dealer or distributor, or to the factory address listed on your warranty card. How To Become A Registered Owner Fill in the registration card and mail it to the address found on the reverse side of the card. Registered owners will receive future product and update information. You don't have to register to receive warranty service. A dated invoice as proof of purchase along with the warranty card are sufficient. What You Need To Have You must provide the following additional equipment to operate your modem: • A Computer/Terminal with communication software. • A RS-232 serial cable or a 25-wire DB25 parallel cable (with one male and one female connector). • A telephone line from your telephone company (dial-up or leased line). Communication Software Communication software controls the modem connected to the computer and directs data to and from the modem. In most PC environments, the modem is used in an asynchronous mode and the software controls the modem by AT commands. 1-8