ZyXEL P-335 Plus User Guide - Page 113
P-335 Plus User's Guide, Bandwidth Management, Bandwidth Management: Advanced
View all ZyXEL P-335 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
P-335 Plus User's Guide The following table describes the labels in this screen. Table 46 Bandwidth Management: Advanced LABEL DESCRIPTION Upstream Bandwidth (kbps) Enter the amount of bandwidth in kbps (2 to 100,000) that you want to allocate for traffic. 20 kbps to 20,000 kbps is recommended. The recommendation is to set this speed to be equal to or less than the speed of the broadband device connected to the WAN port. For example, set the speed to 1000 Kbps (or less) if the broadband device connected to the WAN port has an upstream speed of 1000 Kbps. Application List Use this table to allocate specific amounts of bandwidth based on the pre-defined service. # This is the number of an individual bandwidth management rule. Enable Select this check box to have the ZyXEL Device apply this bandwidth management rule. Service This is the name of the service. Priority Select a priority from the drop down list box. Choose High, Mid or Low. Advanced Setting Click the Edit icon to open the Rule Configuration screen where you can modify the rule. User-defined Service Use this table to allocate specific amounts of bandwidth to specific applications and/or subnets. # This is the number of an individual bandwidth management rule. Enable Select this check box to have the ZyXEL Device apply this bandwidth management rule. Direction Select To LAN to apply bandwidth management to traffic that the ZyXEL Device forwards to the LAN. Select To WAN to apply bandwidth management to traffic that the ZyXEL Device forwards to the WAN. Service Name Enter a descriptive name of up to 19 alphanumeric characters, including spaces. Priority Select a priority from the drop down list box. Choose High, Mid or Low. Modify Click the Edit icon to open the Rule Configuration screen. Modify an existing rule or create a new rule in the Rule Configuration screen. See Section 12.9.2 on page 115 for more information. Click the Remove icon to delete a rule. Apply Click Apply to save your customized settings. Reset Click Reset to begin configuring this screen afresh. Chapter 12 Bandwidth Management 113