ZyXEL P-335 Plus User Guide - Page 114
Rule Configuration with the Pre-defined Service
View all ZyXEL P-335 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
P-335 Plus User's Guide 12.9.1 Rule Configuration with the Pre-defined Service To edit a bandwidth management rule for the pre-defined service in the ZyXEL Device, click the Edit icon in the Application List table of the Advanced screen. The following screen displays. Figure 51 Bandwidth Management Rule Configuration: Pre-defined Service The following table describes the labels in this screen. Table 47 Bandwidth Management Rule Configuration: Pre-defined Service LABEL # Enable Direction Bandwidth Destination Port Source Port Protocol OK Cancel DESCRIPTION This is the number of an individual bandwidth management rule. Select an interface's check box to enable bandwidth management on that interface. These read-only labels represent the physical interfaces. Bandwidth management applies to all traffic flowing out of the router through the interface, regardless of the traffic's source. Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the ZyXEL Device and be managed by bandwidth management. Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum bandwidth allowed for the rule in kilobits per second. This is the port number of the destination. See Table 43 on page 108 for some common services and port numbers. This is the port number of the source. See Table 43 on page 108 for some common services and port numbers. This is the protocol (TCP or UDP) used for the service. Click OK to save your customized settings. Click Cancel to exit this screen without saving. 114 Chapter 12 Bandwidth Management