ZyXEL P-335 Plus User Guide - Page 32
Resetting the ZyXEL Device, Navigating the Web Configurator
View all ZyXEL P-335 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
P-335 Plus User's Guide Figure 4 Change Password Screen Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the ZyXEL Device if this happens to you. 2.3 Resetting the ZyXEL Device If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the ZyXEL Device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to "1234". 2.3.1 Procedure to Use the Reset Button 1 Make sure the PWR LED is on (not blinking). 2 Press the RESET button for ten seconds or until the PWR LED begins to blink and then release it. When the PWR LED begins to blink, the defaults have been restored and the ZyXEL Device restarts. 2.4 Navigating the Web Configurator The following summarizes how to navigate the web configurator from the Status screen.The screen varies depending on the operating mode you choose. 2.4.1 Router Mode Status The following screen displays when the ZyXEL Device is set to router mode. The ZyXEL Device is in router mode by default. 32 Chapter 2 Introducing the Web Configurator