Compaq AP500 Reference Guide - Page 43
Disabling Diskette Boot or Diskette Write, IMPORTANT
UPC - 743172574732
View all Compaq AP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3-7 Disabling Diskette Boot or Diskette Write IMPORTANT: If you disable the diskette drive, the FailSafe Boot Block ROM ignores the disabled component to accommodate a system ROM recovery in the event a system ROM failure occurs. To disable the factory settings (that is, to prevent boot from a diskette or prevent save to a diskette), follow these steps: 1. Turn on the workstation. 2. When you see the words "F10=Setup" in the bottom-right corner of the screen, press the F10 key. NOTE: If you do not press the F10 key while the message is displayed, you must turn off the workstation, then on again, to access the utility. 3. Press the Enter key to bypass the welcome screens and display the Compaq Utilities menu. 4. From the Compaq Utilities menu, select Computer Setup, then press the Enter key. 5. In the Computer Setup window, click Built-in Devices. 6. In the Built-in Devices window, click Storage. 7. Under Removable Media, select the function that you want to disable. 8. Save the configuration and exit the utility. 9. Restart the workstation. Compaq Professional Workstation AP500 Reference Guide