Compaq AP500 Reference Guide - Page 49
Connecting to an Ethernet Network, IMPORTANT, WARNING
UPC - 743172574732
View all Compaq AP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4-2 Network Communications Connecting to an Ethernet Network An RJ-45 Ethernet network connector is included on your workstation. Refer to the following illustration to connect a network cable to the RJ-45 connector. IMPORTANT: If you are connecting to a 100BaseTX network, you must use a Category 5 UTP cable. Figure 4-1. Attaching the network cable to the RJ-45 connector Any RJ-45 receptacle marked with these symbols indicates a Network Interface Connection. WARNING: To reduce risk of electrical shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle.
4-2
Network Communications
Connecting to an Ethernet Network
An RJ-45 Ethernet network connector is included on your workstation.
Refer to the following illustration to connect a network cable to the RJ-45
connector.
IMPORTANT:
If you are connecting to a 100BaseTX network, you must use
a Category 5 UTP cable.
Figure 4-1. Attaching the network cable to the RJ-45 connector
Any RJ-45 receptacle marked with these symbols indicates a
Network Interface Connection.
WARNING:
To reduce risk of electrical shock, fire, or
damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.