Compaq AP500 Reference Guide - Page 62
Removing the Expansion Board, Assembly, IMPORTANT, DO
UPC - 743172574732
View all Compaq AP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
6-8 Hardware Upgrade Preparations Removing the Expansion Board Assembly To remove the expansion board assembly: 1. Turn off the workstation and disconnect the power cord from the grounded AC outlet and the back of the workstation. 2. Remove the side access panel. 3. Refer to the following illustration to remove the expansion board assembly. Figure 6-4. Removing the expansion board assembly 4. Reassemble the workstation, and connect the power cord to the grounded AC outlet and to the workstation. IMPORTANT: After connecting the power cord to the grounded AC outlet and to the workstation, DO NOT turn the power button on if the Power LED is a steady amber color. A steady amber color indicates that the expansion board assembly is not seated properly. Disconnect the power cord and reseat the expansion board assembly. IMPORTANT: When replacing the side access panel, be sure to tighten all four thumbscrews.