Dell 2355DN User Guide - Page 279
Low Heat Error - fuser error
View all Dell 2355DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Display message Meaning Suggested solutions Email Job is completed with error : Pop3 There is a problem in POP3. Configure the POP3 setting. Fax Unit Error A problem has occurred in the fax unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. Fax Job is completed with The receiving fax number is classified as junk Change the Junk Fax Setup option. error fax number. Incompatiable Fax Job is completed with The machine has a communication problem. Ask the sender to try again. error : Communication Error Fax Job is completed with You have tried to select a group location Use a speed dial number or dial a number error : number where only a single location number manually Group not available can be used, such as when adding locations for a multiple send operation. Fax Job is completed with The receiving fax machine did not answer or error : the line is already engaged. Line Busy Try again after in a few minutes. Fax Job is completed with Your machine cannot connect with the error : receiving fax machine or has lost contact Line Error because of a problem with the phone line. Try again. If the problem persists, wait an hour or so until the line is clear and then try again. OR Turn the ECM mode on. Fax Job is completed with The remote fax machine has not answered error : after several redial attempts. No Answer Try again. Verify the number to ensure that a fax can be received. Fax Job is completed with The memory is full. error : Memory Full • Split the transmission into more than one operation. • Print received faxes. • Cancel reserved fax in the Priority Fax feature. Fuser Error Low Heat Error Over Heat Error Fuser unit Error There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. 278