Epson Perfection 1640SU Office Scanner Basics - Page 70
Software Problems, You need to remove jammed, paper from the auto document, feeder.
View all Epson Perfection 1640SU Office manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
s Make sure you select the correct Document Source setting for the option and your image: Auto Document Feeder (ADF), TPU for neg.Film, or TPU for pos.Film. You need to remove jammed paper from the auto document feeder. Follow the steps below: 1. Turn off the scanner. 2. Push down the release lever to slightly raise the feeder mechanism and release the paper. release lever 3. Slowly pull the jammed paper out of the feeder mechanism. (Be careful not to pull too hard; the paper may tear, making it more difficult to remove.) 64 Problem Solving 4. If paper is still jammed inside the mechanism, open the cover to remove it. ADF cover 5. After removing jammed paper, make sure that the cover is closed, and push the feeder mechanism down until it clicks into place. Software Problems You can't open the EPSON TWAIN driver. s Check the cable connection. Also, make sure the scanner's operate light is on. The scanner should be turned on before you start your computer. If necessary, turn on the scanner and restart your computer. s If you are connected via SCSI, make sure there are no SCSI ID conflicts. s Check that your system recognizes your scanner and SCSI board. In Windows 98,