HP 2500 Service Manual - Page 124
Tray 1 (multipurpose tray), Removing tray 1of 2
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Tray 1 (multipurpose tray) 1 Remove the following covers: • right- and left-side covers (see page 93) • front lower cover (see page 109) 2 Open tray 1. 3 Press the multipurpose-roller cover (not shown) inward toward the printer, and then grasp the top edge to remove it. 4 Lift tray 1 slightly to align the notch (callout 1) in the tray 1 cover (callout 2) with the hinge pins of the tray 1 hinges (callout 3). 5 Push the left tray 1 hinge to the right while pulling the tray 1 cover to the left to carefully disengage the hinge pin from the tray 1 cover. 6 Disengage the right tray 1 hinge (callout 4) from the tray 1 cover. 7 Close the tray 1 guide (callout 5), open the tray 1 cover, and then slide the tray 1 cover to the left to remove it from its pins. 32 12 52 42 2 Figure 70. Removing tray 1 (1 of 2) 122 Removal and replacement C9706-90926