HP 2500 Service Manual - Page 41
Loading optional tray2, To load optional tray 2 - color laserjet series manual
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1 Loading optional tray 2 Optional tray 2 supports standard-size paper only, including averageweight letterhead and prepunched paper. For additional information about letterhead and prepunched paper, see the HP Color LaserJet 2500 Series Printer User Guide. CAUTION 2 Print special print media such as labels and transparencies from tray 1 only. Printing special print media from optional tray 2 or optional tray 3 can cause jams. To load optional tray 2 1 Pull optional tray 2 out of the printer and remove any paper. 2 Move the side width guides to match the size of paper you are 3 loading. 3 Extend the rear of the tray until the arrow points to the size you are loading. 4 Load the paper. If this is special paper such as letterhead, load it with the side to be printed facing down and the top edge toward the front of the tray. 4 Note If you are manually duplexing, see the user guide for loading instructions. 5 Make sure the stack of paper is flat in the tray at all four corners, and keep it below the height tabs on the paper length guide in the rear of the tray. Push down on the metal paper lift plate to lock it into 5 place. 6 Slide the tray back into the printer. If you set the rear of the tray to one of the longer sizes, the back of the tray will protrude from the back of the printer. 6 EN 2 Installation and operation 39