HP 2500 Service Manual - Page 184
X Fuser error, x Fan motor error, Scan buffer error
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Table 26. Service error secondary messages (continued) 50.X Fuser error The Ready and Go lights are on. 1 Turn the printer off for approximately 20 to 30 minutes, and then turn the printer back on. 2 If the error persists, replace the fuser (see page 92). 57.x Fan motor error The Attention light is blinking. 1 Turn the printer off and then back on. 2 Turn the printer off, and then reseat the cable that connects the fan and the formatter. 3 Replace the fan (see page 115). 4 Replace the dc controller. 64 Scan buffer error The Go light is blinking. 1 Turn the printer off and then back on. 2 Replace the formatter (see page 101). 182 Troubleshooting C9706-90926
182
Troubleshooting
C9706-90926
50.X Fuser error
The Ready and Go lights are on.
1
Turn the printer off for approximately 20 to 30 minutes, and then turn the printer back on.
2
If the error persists, replace the fuser (see page 92).
57.x Fan motor error
The Attention light is blinking.
1
Turn the printer off and then back on.
2
Turn the printer off, and then reseat the cable that connects the fan and the formatter.
3
Replace the fan (see page 115).
4
Replace the dc controller.
64 Scan buffer error
The Go light is blinking.
1
Turn the printer off and then back on.
2
Replace the formatter (see page 101).
Table 26. Service error secondary messages (continued)