HP 2500 Service Manual - Page 167
To clear jams from inside the printer, described in To clear jams from output areas
View all HP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
1 To clear jams from inside the printer CAUTION Jams in this area might result in loose toner on the page. If you get toner on your clothes or hands, wash them in cold water. (Hot water will set the toner into the fabric.) 1 Open the top cover. 2 2 Remove the imaging drum by pushing it away from you and lifting it out of the printer. Note You cannot reach jams by removing the print cartridges. 3 Complete one of these steps: 3 If the leading edge or the trailing edge of the paper is visible, carefully pull the paper out of the printer. If the paper is too difficult to remove, remove the jam as described in "To clear jams from output areas" on page 167. 4 After the jam has been removed, replace the imaging drum and close the top cover. 4 5 Press (GO) if the Go light is blinking. If the Attention light is still blinking, then another jam is present. See "To clear jams from input areas" on page 166 and "To clear jams from output areas" on page 167. EN 6 Troubleshooting 165