HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 177
Screen Message, Probable Cause, Recommended Action, Security>System IDs - 1805 bypass is missing
View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Table 6-18 POST error messages (continued) Screen Message Probable Cause Recommended Action 1803-CPU1 Not Supported The system board does not support the processor. CAUTION: Disconnect AC power from the workstation before reseating or replacing components because there is power to the system board even when the workstation is powered down. Replace the processor with a compatible one. 1805-CPU Bypass Board is Missing Invalid Electronic Serial Number Bypass board not detected on single-processor system. CAUTION: Disconnect AC power from the workstation before reseating or replacing components because there is power to the system board even when the workstation is powered down. Install bypass board or install second processor. Electronic serial number has become corrupted. ● Run Computer Setup. Enter the serial number under Security>System IDs, and save the changes. ENWW POST error messages 167