HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 41
UUID Universal Unique Identifier, Computer Setup F10 Utility
View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Table 4-1 Computer Setup Utility menu descriptions (continued) Heading Option Description Device Security Makes the following devices available or hidden to the system: ● Serial Port ● All USB Ports ● External USB ports ● Front USB Ports ● System Audio ● IEEE 1394 Controller ● Network Controller 1 ● Network Controller 2 ● Onboard SAS Controller ● Embedded Security Device For each device, Device Available is the default setting and allows the operating system access to the device. Device hidden makes the device unavailable; it is disabled by the BIOS and cannot be enabled by the operating system. When enabled, Embedded Security Device offers these options: ● Enable/disable-Turns the TPM on/off. ● Power-On Authentication Support-Enables/disables an authentication feature that requires you to enter a TPM user key password to boot the system. This feature uses the TPM to generate and store the authentication password. ● Reset Authentication Credential-Resets the authentication functionality and clears all authentication credentials. NOTE: A setup password must be set to enable the Embedded Security Device and to access any security features associated with the Embedded Security Device. Network Service Boot Enables/disables a Network Service Boot which boots using the NIC PXE option ROM. In this case, the actual boot image resides on a remote server. When enabled, you can set the boot order of the NIC PXE option ROM and you can force a network boot by pressing F12 during POST. System IDs Asset Tag A 16-byte string identifying the system. Ownership Tag An 80-byte string identifying ownership of the system. This tag is displayed on the screen during POST. UUID (Universal Unique Identifier) Can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.) Keyboard Enables you to set the keyboard locale for System ID entry. ENWW Computer Setup (F10) Utility 31