HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 88
PCI retainer, Removing the PCI retainer,
View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
PCI retainer For added protection, some cards have PCI retainers installed to prevent movement during shipping. Removing the PCI retainer 1. Disconnect power from the system (Pre-disassembly procedures on page 55), and remove the access panel (Access panel on page 63). Place the workstation on its side with the system board facing up. 2. For both short and tall cards, press in on the sides (1) of the retainer, and rotate it (2) out of the chassis. Figure 5-20 Removing the short or tall card PCI retainer Installing the PCI retainer 1. Disconnect power from the system (Pre-disassembly procedures on page 55), and remove the access panel (Access panel on page 63). Place the workstation on its side with the system board facing up. 78 Chapter 5 Removal and replacement procedures ENWW