HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 181
Changing boot order, cursor to the device that you want to move. Press
View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Changing boot order If the RAID array will be a data array, the disk drive with the operating system must appear higher in the boot order. If the RAID array will be the operating system drive, it should appear higher in the boot order. To change the boot order: 1. Press F10 to call up the BIOS Setup utility when booting the system. 2. If first boot, select the desired language and press Enter. English is the default. 3. Use the arrow keys to highlight Storage>Boot Order, and press Enter. 4. In the Hard Drive section device names are listed in order of boot. Use the arrow keys to move the cursor to the device that you want to move. Press Enter to highlight the device. 5. Use the up/down arrow keys to move the device to the desired order location. Press Enter to un- highlight the device. 6. Press F10 to save changes. 7. Use the arrow keys to highlight File>Save Changes and Exit. Press Enter, then F10. ENWW Changing boot order 171