HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 37
Using Computer Setup (F10) Utility, File>Default Setup>Restore Factory Settings
View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using Computer Setup (F10) Utility You can call up the Computer Setup Utility during workstation restart or power on. To access the Computer Setup Utility menu: 1. Power on or restart the workstation. 2. Press the F10 key as soon as your display is active and the message Setup appears in the lower right corner of the screen. NOTE: If you miss the opportunity to press F10, restart the workstation and press F10 again. Or, you can press Ctrl+Alt+Delete prior to boot . 3. At first boot, select your language from the list, and press the Enter key. In the Computer Setup Utility menu, five headings are displayed: File, Storage, Security, Advanced, and I/O. 4. Use the left and right arrow keys to select the appropriate heading. Use the up and down arrow keys to select the option you want, and press Enter. 5. To apply and save changes, select File>Save Changes and Exit. ● If you have made changes that you do not want applied, select File>Ignore Changes and Exit. ● To reset to factory settings, select File>Default Setup>Restore Factory Settings as Default. Press F10 to accept the changes. Click File>Apply Defaults and Exit. This option restores the original factory system defaults. CAUTION: Do not turn the workstation power off while the ROM is saving your Computer Setup Utility changes because the CMOS could become corrupted. After you exit the F10 Setup screen, it is safe to remove all power from the workstation. ENWW Computer Setup (F10) Utility 27