HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 73
Access panel, WARNING,
View all HP Xw9400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Access panel Before accessing the internal components of the workstation, the access panel must be removed. To remove the access panel: WARNING! Before removing the workstation access panel, be sure that the workstation is powered off and that the power cord is disconnected from the electrical outlet. 1. Disconnect power from the system. 2. If a lock is present, unlock the access panel. The keys are on the rear panel (Rear panel components on page 4). Also, unlock any other locks that are present (Kensington, or Padlock). 3. Pull up on the handle and lift off the cover. Figure 5-5 Opening the access panel To replace the access panel, align the bottom groove of the access panel with the bottom edge of the chassis. Rotate the access panel toward the chassis and press firmly until the latch engages. ENWW Removing and replacing components 63