HP Xw9400 HP xw9400 Workstation - Service and Technical Reference Guide - Page 20

Environmental specifications This section describes environmental specifications of your workstation. Temperature Humidity Altitude Shock Vibration Operating: 5 to 35°C (40 to 95°F) Non-operating: -40 to 60°C (-40 to 140°F) NOTE: Derate by one degree C (1.4 degrees F) for every 305m (1,000 ft.) altitude over 1,524m (5,000 ft.). Operating: 8 to 85% RH, non-condensing Non-operating: 8 to 90% RH, non-condensing Operating: 0 to 3,048m (10,000 ft.) Non-operating: 0 to 9,144m (30,000 ft.) Operating: ½-sine: 40g, 2-3ms Non-operating: ● ½-sine: 160 cm/s, 2-3ms (~100g) ● square: 422 cm/s, 20g NOTE: Values represent individual shock events and do not indicate repetitive shock events. Operating random: 0.5g (rms), 5-300 Hz Non-operating random: 2.0g (rms), 10-500 Hz NOTE: Values do not indicate continuous vibration. PCI card slot power specification Table 1-8 PCI and PCI Express slot power specifications Slot# Slot Type Slot Power (Maximum) 1 PCI Express x16 (x8) 2 PCI Express x16 graphics 25W* 150W** 3 PCI 32 bit, 33 MHz 4 PCI Express x16 (x8) 5 PCI Express x16 graphics 6 PCI-X 100 25W* 25W* 150W** 25W* 7 PCI-X 100/133 25W* * In addition to these slot power specifications, the overall power consumption of the system (including I/O cards, processor, and memory) must not exceed the maximum ratings of the system power supply. See Power supply specifications on page 8 for details. ** Includes 75 W maximum from the system board connector, and 75 W maximum from the auxiliary graphics power connector. 10 Chapter 1 Product overview ENWW