HP rp7440 nPartition Administrator's Guide, Second Edition - Page 111
BOOT LAN INSTALL, BOOT LAN., INSTALL, Procedure 5-7 HP-UX Booting BCH Menu
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Procedure 5-7 HP-UX Booting (BCH Menu) From the BCH Menu, use the BOOT command to boot the HP-UX OS. The BCH Menu is available only on HP 9000 servers. 1. Access the BCH Main Menu for the nPartition on which you want to boot HP-UX. Log in to the management processor (MP) and enter CO to access the Console list. Choose the nPartition console. When accessing the console, confirm that you are at the BCH Main Menu (the Main Menu: Enter command or menu> prompt). If you are at a BCH menu other than the Main Menu, then enter MA to return to the BCH Main Menu. 2. Choose which device you want to boot. From the BCH Main Menu, use the PATH command to list any boot path variable settings. The primary (PRI) boot path normally is set to the main boot device for the nPartition. You also can use the SEARCH command to find and list potentially bootable devices for the nPartition. Main Menu: Enter command or menu > PATH Primary Boot Path: 0/0/2/0/0.13 0/0/2/0/0.d (hex) HA Alternate Boot Path: 0/0/2/0/0.14 0/0/2/0/0.e (hex) Alternate Boot Path: 0/0/2/0/0.0 0/0/2/0/0.0 (hex) Main Menu: Enter command or menu > 3. Boot the device using the BOOT command from the BCH interface. You can issue the BOOT command in any of the following ways: • BOOT Issuing the BOOT command with no arguments boots the device at the primary (PRI) boot path. • BOOT bootvariable This command boots the device indicated by the specified boot path, where bootvariable is the PRI, HAA, or ALT boot path. For example, BOOT PRI boots the primary boot path. • BOOT LAN INSTALL or BOOT LAN.ip-address INSTALL The BOOT... INSTALL commands boot HP-UX from the default HP-UX install server or from the server specified by ip-address. • BOOT path This command boots the device at the specified path. You can specify the path in HP-UX hardware path notation (for example, 0/0/2/0/0.13) or in path label format (for example, P0 or P1) . If you specify the path in path label format, then path refers to a device path reported by the last SEARCH command. After you issue the BOOT command, the BCH interface prompts you to specify whether you want to stop at the ISL prompt. To boot the /stand/vmunix HP-UX kernel from the device without stopping at the ISL prompt, enter n to automatically proceed past ISL and execute the contents of the AUTO file on the chosen device. (By default the AUTO file is configured to load /stand/vmunix.) Booting and Shutting Down HP-UX 111