HP rp7440 nPartition Administrator's Guide, Second Edition - Page 169
Task Summaries for Creating and Configuring nPartitions, Service Processor MP or GSP:
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Table 6-1 nPartition Configuration Task Summaries (continued) Task Setting nPartition Boot Paths Summary • NOTE: On HP Integrity servers, nPartition boot paths can be listed and configured only from the local nPartition. See Chapter 5 (page 87) for detailed nPartition boot configuration tasks and related information. • BCH Menu: BCH Main menu, PATH command. • EFI Boot Manager: Boot Option Maintenance menu. • EFI Shell: bcfg command. • HP-UX: setboot command, or parmodify -p# -b... -s... -t... command. Setting the Date and Time • NOTE: The Service Processor (MP or GSP) date and time is stored and managed separately from nPartition times, and each nPartition has independently stored and managed date and time settings. Changes to the date and time for an nPartition do not affect other nPartitions or the MP. • Service Processor (MP or GSP): DATE command configures the MP date and time. • BCH Menu: Configuration menu, TIME command configures the local nPartitions date and time. The BCH time is set and presented in GMT (Greenwich mean time). • EFI Shell: date command and time command configure the local nPartition date and time. The EFI time is set and presented in GMT (Greenwich mean time). • HP-UX: date command configures the local nPartition date and time. Use set_parms timezone to set the HP-UX system time zone. Restricting nPartition Configuration Privilege • NOTE: nPartition Configuration Privilege is supported on servers based on the HP sx1000 chipset or HP sx2000 chipset. When the nPartition Configuration Privilege for a complex is restricted the following nPartition configuration actions are prohibited (except when using the MP IMPI LAN access): - Changes to the complex name, cell assignments, and cell local memory parameters. - Powering on/off non-local cells. - Changes to Partition Configuration Data for non-local nPartitions. When nPartition Configuration Privilege is unrestricted the above actions are permitted. • Service Processor (MP or GSP): the PARPERM command restricts and unrestricts nPartition Configuration Privilege. Task Summaries for Creating and Configuring nPartitions 169