HP rp7440 nPartition Administrator's Guide, Second Edition - Page 251
username, IPaddress, hostname, the nPartition and leave it in the shutdown for reconfig
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
-rcell -T flag -B -u username -g -h IPaddress|hostname Specifies the core cell choices. One to four cells can be specified. Specifies whether Hyper-Threading should be enabled or not (only if cells support this feature). By default Hyper-Threading is disabled. The valid values for flag are: y Enable Hyper-Threading, which allows multiple threads to run concurrently on each processor core. n Disable Hyper-Threading. This is the default value. Specifies to boot the nPartition. The default is not to boot the nPartition and leave it in the shutdown for reconfig state. Enhanced nPartition Commands only. Specifies the account and authorization to access an nPartition other than the local nPartition. The -h option is required if this option is used. username specifies a configured user name on the target nPartition. Enhanced nPartition Commands only. Allows access to the complex specified by the -h option. The accessed complex is then considered the target complex. Access is through the service processor LAN port.The -h option is required if this option is used. Enhanced nPartition Commands only. This option is only used in combination with either the -u or -g option. IPaddress|hostname specifies the IP address or hostname of the target nPartition (-u) or service processor (-g). parcreate Command 251