HP rp7440 nPartition Administrator's Guide, Second Edition - Page 196
Procedure 6-22 Setting Core Cell Choices nPartition Commands, For details see
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
3. Exit the console and service processor interfaces if finished using them. To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns to the service processor Main Menu. To exit the service processor, type X at the Main Menu. Procedure 6-22 Setting Core Cell Choices (nPartition Commands) From the command line, use the parmodify command to configure the core cell choices for an nPartition. You also can use the parstatus -V -p# command to list the core cell choices for an nPartition (-p# where # is the nPartition number). NOTE: You can remotely perform this task using remote administration options supported by the Enhanced nPartition Commands or Partition Manager Version 2.0. Remote administration is supported by the Partition Manager Tools→Switch Complexes action and by the nPartition command -u... -h... options or -g... -h... options. For details see "Tools for Configuring nPartitions" (page 165). 1. Login to a system with the nPartition commands installed. If using remote administration features to set core cell choices, you can login to any system with Enhanced nPartition Commands installed. 2. Issue the parstatus -V -p# command to list the current core cell choices and core cell use for an nPartition. The parstatus -V -p# command list detailed status for the specified nPartition (-p# where # is the nPartition number). The nPartition status includes the current active core cell ("Core Cell"), and any core cell choice settings. The core cell choice preferences are listed by parstatus as the "Core Cell Alternate" settings with "1" being the highest priority and "2" through "4" as the lower priority core cell choices. # parstatus -V -p0 [Partition] Partition Number : 0 Partition Name : jules00 Status : active IP address : 0.0.0.0 Primary Boot Path : 0/0/2/0/0.13.0 Alternate Boot Path : 0/0/2/0/0.0.0 HA Alternate Boot Path : 0/0/2/0/0.14.0 PDC Revision : 6.0 IODCH Version : 23664 CPU Speed : 552 MHz Core Cell : cab0,cell0 Core Cell Alternate [1]: cab0,cell0 Core Cell Alternate [2]: cab0,cell2 .... Core Connected Par Hardware Location Usage IO To Num cab0,bay0,chassis1 active yes cab0,cell0 0 cab0,bay1,chassis3 active yes cab0,cell2 0 # 196 Creating and Configuring nPartitions