Home » HP Manuals » Servers » HP rp7440 » Manual Viewer

HP rp7440 nPartition Administrator's Guide, Second Edition - Page 115

Boot to the HP-UX Boot Loader prompt

Add to My Manuals
Save this manual to your list of manuals

Page 115 highlights

To exit the ISL prompt and return to the BCH interface, issue the EXIT command instead of specifying one of the hpux loader commands. Refer to the hpux(1M) manpage for a detailed list of hpux loader options. Example 5-1 Single-User HP-UX Boot ISL Revision A.00.42 JUN 19, 1999 ISL> hpux -is /stand/vmunix Boot : disk(0/0/2/0/0.13.0.0.0.0.0;0)/stand/vmunix 8241152 + 1736704 + 1402336 start 0x21a0e8 .... INIT: Overriding default level with level 's' INIT: SINGLE USER MODE INIT: Running /sbin/sh # 4. Exit the console and management processor interfaces if you are finished using them. To exit the BCH environment, press ^B (Control-B); this exits the nPartition console and returns to the management processor Main Menu. To exit the management processor, type X at the Main Menu. Procedure 5-11 Single-User Mode HP-UX Booting (EFI Shell) From the EFI Shell environment, boot in single-user mode by stopping the boot process at the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) entering the boot -is vmunix command. The EFI Shell is available only on HP Integrity servers. Refer to "ACPI Configuration for HP-UX Must Be default" (page 110) for required configuration details. 1. Access the EFI Shell environment for the nPartition on which you want to boot HP-UX in single-user mode. Log in to the management processor (MP) and enter CO to access the Console list. Choose the nPartition console. When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI menu). If you are at another EFI menu, choose the Exit option from the submenus until you return to the screen with the EFI Boot Manager heading. From the EFI Boot Manager menu, choose the EFI Shell menu option to access the EFI Shell environment. 2. Access the EFI System Partition (fsX: where X is the file system number) for the device from which you want to boot HP-UX. 3. When accessing the EFI System Partition for the desired boot device, issue the HPUX command to initiate the \EFI\HPUX\HPUX.EFI loader on the device you are accessing. 4. Boot to the HP-UX Boot Loader prompt (HPUX>) by pressing any key within the 10 seconds given for interrupting the HP-UX boot process. You will use the HPUX.EFI loader to boot HP-UX in single-user mode in the next step. After you press any key, the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) is provided. For help using the HPUX.EFI loader, enter the help command. To return to the EFI Shell, enter exit. Booting and Shutting Down HP-UX 115

Section	Page
nPartition Administrator's Guide	1
Table of Contents	3
About This Document	11
New and Changed Information in This Edition	11
Document Organization	11
Typographic Conventions	12
Related Information	13
Publishing History	13
HP Encourages Your Comments	13
1 Getting Started with nPartitions	15
Introduction to nPartitions	15
Operating Systems Supported on nPartitions	15
HP Server Support for nPartitions	16
HP Superdome Hybrid Servers: Intel® Itanium® 2 and PA-RISC nPartition Mixing	17
Hardware Components of nPartition-Capable Servers	18
Administration Tools for nPartitions	18
Commands for Configuring nPartitions	19
Availability of nPartition Commands	21
Enhanced nPartitions Commands for Windows	21
Enhanced nPartition Commands for Linux	22
Partition Manager	22
Partition Manager Version 2.0 for Windows	23
nPartition Properties	23
Partition Numbers	24
Assigned and Unassigned Cells	24
Base Cells	24
Core Cells	24
Active and Inactive Cells	25
Cell Local Memory	25
Cell Property Details	25
Active and Inactive nPartition Boot States	27
Overview of Managing nPartitions	27
Basics of Listing nPartition and Complex Status	27
Basics of nPartition Creation	29
Genesis Partition	30
Basics of nPartition Modification	30
nPartition Modification Tasks	31
Basics of nPartition Booting and Resetting	32
Boot Process for Cells and nPartitions	32
Common nPartition Boot Commands and Tasks	33
Complex Profile	36
Changing the Server Complex Profile	37
How the Complex Profile is Updated	37
Complex Profile Entry Locking and Unlocking	38
Complex Profile Group Details	39
Remote and Local Management of nPartitions	41
Intelligent Platform Management Interface (IPMI)	41
IPMI Block Transfer (IPMI BT)	42
nPartition Configuration Privilege	42
IPMI over LAN	42
Web-Based Enterprise Management (WBEM)	43
Local Management	43
Remote Management Using WBEM	44
WBEM Remote Management Files	44
nPartition Commands Support for Remote Management Using WBEM	45
Partition Manager Support for Remote Management Using WBEM	45
Remote Management Using IPMI over LAN	46
nPartition Commands Support for Remote Management Using IPMI over LAN	46
Partition Manager Support for Remote Management Using IPMI over LAN	47
Licensing Information: Getting Server Product Details	47
nPartition and Virtual Partition Unique Identifiers	47
2 nPartition Server Hardware Overview	49
sx1000 Chipset for HP Servers	49
sx2000 Chipset for HP Servers	49
Model Identifiers for Machine Hardware	49
Server Hardware Details: Cell-Based HP Servers	51
Two-Cell nPartition Server Model	55
Four-Cell nPartition Server Model	56
Superdome Server Models	57
HP Superdome 16-/32-Way Servers: SD16000, SD16A, and SD16B	58
HP Superdome 32-/64-Way Servers: SD32000, SD32A, and SD32B	58
HP Superdome 64-/128-Way Servers: SD64000, SD64A, and SD64B	59
HP Superdome I/O Expansion Cabinet	59
3 Planning nPartitions	61
nPartition Hardware Requirements for Operating Systems	61
Configuration Requirements for nPartitions	62
Recommended nPartition Configurations	63
Recommended HP Superdome nPartition Configurations	64
4 Using Management Interfaces and Tools	67
SMS (Support Management Station) for HP Superdome Servers	67
Overview of nPartition Service Processor (MP or GSP) Interfaces	67
Service Processor (MP or GSP) Features	68
Service Processor Accounts and Access Levels	69
nPartition Console Features	70
nPartition Console Access versus Direct OS Login	71
Boot Console Handler System Boot Environment	71
Extensible Firmware Interface System Boot Environment	72
Windows Special Administration Console (SAC)	72
Accessing and Using the Service Processor	74
Using Service Processor Menus	76
Navigating through Service Processor Menus	76
Network Configuration for a Service Processor	77
Viewing Console Logs	77
Viewing Chassis Codes or Event Logs	78
Virtual Front Panel (VFP) nPartition Views	79
Command Reference for Service Processor Commands	80
Command Reference for EFI Shell Commands	81
Command Reference for BCH Menu Commands	84
5 Booting and Resetting nPartitions	87
Overview of nPartition System Booting	87
Boot Process Differences for nPartitions on HP 9000 servers and HP Integrity servers	88
Types of Booting and Resetting for nPartitions	89
System Boot Configuration Options	91
HP 9000 Boot Configuration Options	91
HP Integrity Boot Configuration Options	91
Tools for Booting nPartitions	95
Task Summaries for nPartition Boot and Reset	96
Troubleshooting Boot Problems	100
Accessing nPartition Console and System Boot Interfaces	101
Monitoring nPartition Boot Activity	104
Finding Bootable Devices	106
Performing a Transfer of Control Reset	107
Booting and Shutting Down HP-UX	108
HP-UX Support for Cell Local Memory	108
Adding HP-UX to the Boot Options List	109
Booting HP-UX	110
HP-UX Booting	110
Single-User Mode HP-UX Booting	114
LVM-Maintenance Mode HP-UX Booting	116
Shutting Down HP-UX	117
Booting and Shutting Down HP OpenVMS I64	119
HP OpenVMS I64 Support for Cell Local Memory	120
Adding HP OpenVMS to the Boot Options List	120
Booting HP OpenVMS	122
Shutting Down HP OpenVMS	123
Booting and Shutting Down Microsoft Windows	124
Microsoft Windows Support for Cell Local Memory	124
Adding Microsoft Windows to the Boot Options List	125
Booting Microsoft Windows	126
Shutting Down Microsoft Windows	128
Booting and Shutting Down Linux	129
Linux Support for Cell Local Memory	129
Adding Linux to the Boot Options List	130
Booting Red Hat Enterprise Linux	131
Booting SuSE Linux Enterprise Server	132
Shutting Down Linux	134
Rebooting and Resetting nPartitions	135
Performing a Reboot for Reconfig	139
Shutting Down to a Shutdown for Reconfig (Inactive) State	141
Booting an Inactive nPartition	146
Booting over a Network	147
Booting to the HP-UX Initial System Loader (ISL)	149
Booting to the HP-UX Loader (HPUX.EFI)	150
Using HP-UX Loader Commands	151
HPUX.EFI Boot Loader Commands	151
HPUX Boot Loader Commands Issued from ISL	151
Booting to the Linux Loader (ELILO.EFI)	152
Linux Boot Option Management	153
Linux Loader Configuration File (elilo.conf)	153
Using Linux Loader (ELILO) Commands	154
Configuring Boot Paths and Options	155
Configuring Autoboot Options	158
Configuring Boot-Time System Tests	161
6 Creating and Configuring nPartitions	165
Tools for Configuring nPartitions	165
Task Summaries for Creating and Configuring nPartitions	165
Creating a Genesis Partition	170
Creating a New nPartition	172
Removing (Deleting) an nPartition	176
Assigning (Adding) Cells to an nPartition	179
Unassigning (Removing) Cells from an nPartition	182
Renaming an nPartition	185
Renaming a Server Complex	187
Setting Cell Attributes	189
Setting nPartition Core Cell Choices	194
Unlocking Complex Profile Entries	198
Canceling Pending Changes to the Complex Profile	199
7 Managing Hardware Resources	201
Tools for Managing Hardware	201
Task Summaries for Hardware Resource Management	201
Powering Server Cabinets On and Off	205
Powering Cells and I/O Chassis On and Off	206
Turning Attention Indicators (LEDs) On and Off	209
Configuring and Deconfiguring Cells	213
Configuring and Deconfiguring Processors	217
Enabling and Disabling Hyper-Threading on Dual-Core Intel® Itanium® 2 Processors	218
Configuring and Deconfiguring Memory (DIMMs)	220
Complex Health Analysis of a Server	222
8 Listing nPartition and Hardware Status	223
Tools for Listing Status	223
Task Summaries for nPartition and Hardware Status	223
Listing Cell Configurations	226
Listing Processor Configurations	227
Listing Memory Configurations	229
Listing Input/Output (I/O) Configurations	231
Listing Cabinets in a Server Complex	234
Listing Product and Serial Numbers	235
Listing nPartition Configurations	236
Listing the Local nPartition Number	237
Listing Power Status and Power Supplies	238
Listing Fan and Blower Status	240
A nPartition Commands	243
Specifying Cells and I/O Chassis to Commands	243
Cell Specification Formats	243
I/O Specification Format	244
Specifying Remote Management Options to Commands	247
parcreate Command	249
parmodify Command	252
parremove Command	256
parstatus Command	258
parunlock Command	260
fruled Command	262
frupower Command	264

Match case Limit results 1 per page

To exit the ISL prompt and return to the BCH interface, issue the

EXIT

command instead

of specifying one of the

hpux

loader commands.

Refer to the

hpux

(1M) manpage for a detailed list of

hpux

loader options.

Example 5-1 Single-User HP-UX Boot

ISL Revision A.00.42

JUN 19, 1999

ISL>

hpux -is /stand/vmunix

Boot

: disk(0/0/2/0/0.13.0.0.0.0.0;0)/stand/vmunix

8241152 + 1736704 + 1402336 start 0x21a0e8

....

INIT: Overriding default level with level 's'

INIT: SINGLE USER MODE

INIT: Running /sbin/sh

Exit the console and management processor interfaces if you are finished using them.

To exit the BCH environment, press

(

Control-B

); this exits the nPartition console and

returns to the management processor Main Menu. To exit the management processor, type

at the Main Menu.

Procedure 5-11 Single-User Mode HP-UX Booting (EFI Shell)

From the EFI Shell environment, boot in single-user mode by stopping the boot process at the

HPUX.EFI

interface (the HP-UX Boot Loader prompt,

HPUX>

) entering the

boot -is vmunix

command. The EFI Shell is available only on HP Integrity servers.

Refer to

“ACPI Configuration for HP-UX Must Be default” (page 110)

for required configuration

details.

Access the EFI Shell environment for the nPartition on which you want to boot HP-UX in

single-user mode.

to access the Console list. Choose

the nPartition console.

When accessing the console, confirm that you are at the EFI Boot Manager menu (the main

EFI menu). If you are at another EFI menu, choose the

Exit

option from the submenus until

you return to the screen with the

EFI Boot Manager

heading.

From the EFI Boot Manager menu, choose the

EFI Shell

menu option to access the EFI Shell

environment.

Access the EFI System Partition (

where

is the file system number) for the device

from which you want to boot HP-UX.

When accessing the EFI System Partition for the desired boot device, issue the

HPUX

command

to initiate the

\EFI\HPUX\HPUX.EFI

loader on the device you are accessing.

Boot to the HP-UX Boot Loader prompt (

HPUX>

) by pressing any key within the 10 seconds

given for interrupting the HP-UX boot process. You will use the

HPUX.EFI

loader to boot

HP-UX in single-user mode in the next step.

After you press any key, the

HPUX.EFI

interface (the HP-UX Boot Loader prompt,

HPUX>

)

is provided. For help using the

HPUX.EFI

loader, enter the

help

command. To return to

the EFI Shell, enter

exit

Booting and Shutting Down HP-UX

115