HP rp7440 nPartition Administrator's Guide, Second Edition - Page 265
cabinet/slot, cell_ID, IOchassis, cabinet, username, IPaddress, hostname, h
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
-f -c cell -i IOchassis -C -I -l cabinet -u username -g -h IPaddress|hostname Power off the specified cells or I/O chassis. The specified cell is powered on/off or the power status is displayed. A cell can be specified either in the local (cabinet/slot) or global (cell_ID) format. The specified IOchassis is powered on/off or the power status is displayed. Display power status of all cells. By default the scope is the entire complex if the -l option is not specified. Display power status of all I/O chassis. The scope is the entire complex if the -l option is not specified. Limit the scope of the -C or -I option to the specified cabinet. Enhanced nPartition Commands only. Specifies the account and authorization to access an nPartition other than the local nPartition. The -h option is required if this option is used. username specifies a configured user name on the target nPartition. Enhanced nPartition Commands only. Allows access to the complex specified by the -h option. The accessed complex is then considered the target complex. Access is through the service processor LAN port.The -h option is required if this option is used. Enhanced nPartition Commands only. This option is only used in combination with either the -u or -g option. IPaddress|hostname specifies the IP address or hostname of the target nPartition (-u) or service processor (-g). frupower Command 265