HP rp7440 nPartition Administrator's Guide, Second Edition - Page 266
cplxmodify Command, option is required if this option is used.
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
cplxmodify Command The cplxmodify command modifies attributes of a cell-based server complex, such as the complex name. NOTE: The cplxmodify command is only supported by the Enhanced nPartition Commands. Root permission is required to run this command. Refer to the cplxmodify(1M) manpage for details. Synopsis cplxmodify -N ComplexName [ -u username -h IPaddress|hostname | -g -h IPaddress|hostname ] • The -u... -h... set of options may be specified to cause the command to send its management request using WBEM to an nPartition other than the local nPartition (but can also be used as a "loopback access" to the local nPartition). • The -g... -h... options may be specified to cause the command to send its management request using IPMI over LAN to a service processor in another server complex (but can also be used as a "loopback access" to the service processor in the local complex). The -u and -g options are mutually exclusive. Options -N ComplexName -u username Changes the name of the target complex to ComplexName. Specifies the account and authorization to access an nPartition other than the local nPartition. The -h option is required if this option is used. username specifies a configured user name on the target nPartition. -g -h IPaddress|hostname Allows access to the complex specified by the -h option. The accessed complex is then considered the target complex. Access is through the service processor LAN port.The -h option is required if this option is used. This option is only used in combination with either the -u or -g option. IPaddress|hostname specifies the IP address or hostname of the target nPartition (-u) or service processor (-g). 266 nPartition Commands