Kodak 1252972 User Guide - Page 22

Status lights, On/Off Lights, Light Status, Cause, Action/Solution, Printer Power Cord Light

Page 22 highlights

Printer Overview Status lights The tables below describe the meaning of each light and condition, and offer tips on what action to take. Light Status Cause Off The printer is turned off. The printer does not have power applied. Blinks On The printer is initializing or busy. The printer is ready. On/Off Lights Action/Solution Press On/Off to turn the printer on. Ensure that the printer power cord is properly plugged into the back of the printer. Verify that the power supply and/or power cord LED is lit. Check that the power supply is connected to the power cord, and that it is properly connected to the electrical outlet.a None. Allow the printer to finish the initialization process. None. aMost power supplies used with this printer are equipped with a status light which illuminates when electricity is applied. If you cannot determine if the power supply is working properly, contact Kodak Service & Support for assistance. Printer Power Cord Light Light Status Cause Action/Solution Off The printer power cord is not Reconnect the printer power cord plug to the printer. properly connected to the printer. The electrical power cord is not properly connected to your electrical outlet. Reconnect the cord to the electrical outlet. Ensure that the electrical power cord is fully connected to the alternating current (AC) adapter at the end of the printer power cord. The electrical outlet has no power. Plug a working device into the wall outlet to test it, or have it checked by an electrician. The problem may lie with the power supply. Check the power supply status light, if available. As needed, visit Kodak.com for additional troubleshooting steps, or contact Kodak Service & Support. On The power supply is supplying None. power to the printer. 14 www.kodak.com/go/aiosupport

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

Printer Overview
14
www.kodak.com/go/aiosupport
Status lights
The tables below describe the meaning of each light and condition, and offer tips on
what action to take.
a
Most power supplies used with this printer are equipped with a status light which illuminates
when electricity is applied. If you cannot determine if the power supply is working properly, contact
Kodak Service & Support for assistance.
On/Off Lights
Light Status
Cause
Action/Solution
Off
The printer is turned off.
Press On/Off to turn the printer on.
The printer does not have
power applied.
Ensure that the printer power cord is properly plugged into
the back of the printer.
Verify that the power supply and/or power cord LED is lit.
Check that the power supply is connected to the power
cord, and that it is properly connected to the electrical
outlet.
a
Blinks
The printer is initializing or
busy.
None. Allow the printer to finish the initialization process.
On
The printer is ready.
None.
Printer Power Cord Light
Light Status
Cause
Action/Solution
Off
The printer power cord is not
properly connected to the printer.
Reconnect the printer power cord plug to the printer.
The electrical power cord is not
properly connected to your
electrical outlet.
Reconnect the cord to the electrical outlet. Ensure
that the electrical power cord is fully connected to
the alternating current (AC) adapter at the end of
the printer power cord.
The electrical outlet has no power.
Plug a working device into the wall outlet to test it,
or have it checked by an electrician.
The problem may lie with the power
supply.
Check the power supply status light, if available. As
needed, visit Kodak.com for additional
troubleshooting steps, or contact Kodak Service &
Support.
On
The power supply is supplying
power to the printer.
None.