Kodak 1252972 User Guide - Page 95
Weak signal, Cannot connect to network
UPC - 041771252977
View all Kodak 1252972 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
KODAK ESP 7 All-in-One Printer Weak signal Probable Cause The access point is too far away or there is interference. Corrective Action • If there is a long distance between your computer or access point and the printer, move them closer together. • If there are metal objects (such as a metal bookcase or refrigerator) in the transmission path, clear the path between the printer and the computer or access point. • If a cordless telephone, microwave, or other device that emits radio signals transmitting at 2.4 GHz is nearby, move it farther away to reduce radio interference. See NOTE:, page 89. Cannot connect to network Probable Cause 1 The equipment is not turned on. Corrective Action Turn on the networked devices, such as the access point for an infrastructure network, or the computer for an ad hoc network. For more information on how to turn on the access point, see the documentation that came with your access point. Probable Cause 2 The All-in-One printer is not receiving a signal. Corrective Action Move the access point and the printer closer together. Then go through setup again. Probable Cause 3 You have entered the SSID incorrectly. Corrective Action Enter the SSID correctly. Remember that the SSID is case-sensitive. Probable Cause 4 You have entered the WEP key incorrectly. Corrective Action Enter the WEP key correctly. Remember that the WEP key is case-sensitive. Probable Cause 5 The wireless settings on the printer do not match the wireless settings of your access point. www.kodak.com/go/aiosupport 87