Kodak 1252972 User Guide - Page 64
Monitoring and adjusting the printer's performance, Printhead Alignment, Maintenance
UPC - 041771252977
View all Kodak 1252972 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Maintaining Your Printer 1. Unplug the printer and raise the lid. 2. Clean the underside with a soft cloth or sponge, slightly moistened with a mild soap and warm water. 3. Wipe the underside gently to loosen debris. Do not scrub. 4. Dry the underside with a chamois or soft cloth. 5. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the underside thoroughly with a damp cloth to remove any residual alcohol. 6. When finished cleaning, plug in the printer. Monitoring and adjusting the printer's performance From the control panel, you can perform many tasks to keep this printer in good working order. For example, you can check the status of the printer's inkjet nozzle to ensure high-quality prints. Kodak recommends that you run a nozzle check if you are experiencing changes in image quality. You can also use the Printhead Alignment function if you see degradation in print quality. 1. Make sure that there are 5-10 sheets of plain paper loaded in the bottom paper tray. 2. Press Menu to display the main menu. 3. Press until Maintenance is selected. 4. As needed, press until the desired option is selected. 5. Press OK. 6. Follow the prompts on the LCD display to initiate or cancel the task. 56 www.kodak.com/go/aiosupport