Kodak 1252972 User Guide - Page 97
Invalid WPA Passphrase, Another device connected to the access point, Corrective Action
UPC - 041771252977
View all Kodak 1252972 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
KODAK ESP 7 All-in-One Printer The WEP key index setting of your access point does not match the WEP key index setting of the All-in-One printer. Corrective Action The printer is looking for a WEP key index of 1. If the WEP key index setting was changed on the access point, open the Embedded Web Server for the printer and update the index setting to match the index setting of your access point. Once you've updated the index setting on the printer, repeat the setup procedure. NOTE: Some access points provide more than one WEP key. Make sure you use the first WEP key (index 1) when setting up your wireless network. Invalid WPA Passphrase Probable Cause You have entered the WPA passphrase incorrectly. Corrective Action Enter the correct passphrase. Make sure it has between 8 and 63 characters, and matches the passphrase programmed in the access point (case sensitive). Another device connected to the access point Probable Cause Another device in the vicinity connected to your access point before the All-in-One printer was able to connect. Corrective Action Cancel the setup and start over. www.kodak.com/go/aiosupport 89