Kodak 1252972 User Guide - Page 96
Unsupported authentication or encryption type, Invalid WEP Key
UPC - 041771252977
View all Kodak 1252972 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Troubleshooting Corrective Action Print a network configuration page to compare the wireless settings of the printer with the wireless settings for your access point. Change either the device or access point settings so that both the printer and the access point have matching wireless settings. Probable Cause 6 You entered the wrong mode (ad hoc or infrastructure) or security type. Corrective Action Enter the correct mode or security type. Print a network configuration page to compare the wireless settings of the printer with the wireless settings for your access point. Change either the device or access point settings so that both the printer and the access point have matching wireless settings. Probable Cause 7 MAC filtering is enabled on your access point. Corrective Action Keep MAC filtering enabled, but change the settings to allow the access point to communicate with the printer. Unsupported authentication or encryption type Probable Cause Your network is configured with an authentication protocol not supported by the Kodak All-in-One printer. Corrective Action Open the Embedded Web Server of your access point and change the security settings. Use one of the supported protocol types. NOTE: Types not supported include WPS, WPA2-Enterprise, LEAP, PEAP, EAP-MD5, EAP-TLS, and EAP-TTLS. Invalid WEP Key Probable Cause 1 An invalid WEP key was entered. Corrective Action If you do not know the WEP key, see the documentation that came with your access point/router. The WEP key is stored within the access point. Usually you can find the WEP key by logging on to the Embedded Web Server of your access point through your computer. Probable Cause 2 88 www.kodak.com/go/aiosupport