Konica Minolta Kodak Ngenuity 9090DB User Guide - Page 42

Cleaning procedures, To access the Material Safety Data Sheet MSDS, you will

Get Konica Minolta Kodak Ngenuity 9090DB PDF manuals and user guides View all Konica Minolta Kodak Ngenuity 9090DB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Cleaning procedures Cleaning your scanner and performing preventative maintenance on a regular basis is required to ensure the best possible image quality. Some document types generate more paper dust and debris and may require more frequent cleaning. Before cleaning your scanner or replacing consumables, review the following information: • Turn the scanner off before performing maintenance procedures. • Remove any jewelry or any items from hands or wrists that could become caught on internal scanner components. • Some debris from the rubber tires on the skimmer module and separator roller is normal. Tire debris does not always mean that the tires are worn or damaged. After cleaning, inspect the tires for wear and replace the separator roller or skimmer module if necessary. • When cleaning rollers/tires, allow the rollers/tires to dry completely before scanning. • Use only the recommended cleaning supplies. Using unapproved cleaning fluids or solvents may damage the rubber tires. • Do not use cleaners in confined areas, use with adequate ventilation. • Do not use flammable compressed aerosols on or around the scanner. NOTE: To access the Material Safety Data Sheet (MSDS), you will need to provide the catalog number of the supply. See "Supplies and Consumables" later in this chapter for catalog numbers. A-61662 April 2010 5-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
A-61662
April 2010
5-3
Cleaning procedures
Cleaning your scanner and performing preventative maintenance on a
regular basis is required to ensure the best possible image quality.
Some document types generate more paper dust and debris and may
require more frequent cleaning.
Before cleaning your scanner or replacing consumables, review the
following information:
•
Turn the scanner off before performing maintenance procedures.
•
Remove any jewelry or any items from hands or wrists that could
become caught on internal scanner components.
•
Some debris from the rubber tires on the skimmer module and
separator roller is normal. Tire debris does not always mean that the
tires are worn or damaged. After cleaning, inspect the tires for wear
and replace the separator roller or skimmer module if necessary.
•
When cleaning rollers/tires, allow the rollers/tires to dry completely
before scanning.
•
Use only the recommended cleaning supplies. Using unapproved
cleaning fluids or solvents may damage the rubber tires.
•
Do not use cleaners in confined areas, use with adequate
ventilation.
•
Do not use flammable compressed aerosols on or around the
scanner.
NOTE:
To access the Material Safety Data Sheet (MSDS), you will
need to provide the catalog number of the supply. See
“Supplies and Consumables” later in this chapter for
catalog numbers.